What are the precautions for faucet installation

Update:09 May 2020
Summary:

The faucet is an indispensable hardware item in the hom […]

What are the precautions for faucet installation

The faucet is an indispensable hardware item in the home and a necessary condition for domestic water. So what are the precautions for the faucet device? The following faucet accessories manufacturers will take us to take a look!
1. When installing the faucet at home, it is advisable to ask a professional installation master to do it. In particular, there are many fittings for faucets, and a step-by-step device is required. If a link is not completed properly, water leakage will occur.
2. Precautions for the faucet device-the device must not bump against hard objects
During installation, the faucet must not collide with other hard objects. Some cement, glue and other debris should not remain on the faucet's surface, otherwise it will affect the appearance of the coating gloss.
3. Precautions for the faucet device-remove debris from the water pipe
If the house in the home is newly built, the water pipes are newly laid, so when installing the faucet, pay attention to whether there will be impurities such as sand particles in the water, and advocate long-term water discharge, which can clear the debris in the pipe and the water quality becomes More and more clear.
4. Precautions for the faucet device-open the faucet should be light
After the faucet device is installed, the movement should be light when it is opened, or it will cause damage. Even the traditional faucet can not be too laborious and tight when it is closed. After normal use, it is necessary to wipe the appearance of the faucet in time.
Concluding remarks of faucet accessories manufacturers: The above are the precautions for faucet devices introduced to you, and I hope to bring assistance to friends in need. If the faucet in the home is used for a period of time, the water volume decreases or the water heater is turned off, it is recommended to immediately cut off the flow of cold and hot water, remove the screen cover of the spout mouth and clean it, and then install it.

0
Contact Us