Various designs on energy-saving faucets

Update:15 Dec 2021

Nowadays, the original design of the faucet in the home […]

Various designs on energy-saving faucets

Nowadays, the original design of the faucet in the home kitchen is more and more water-saving. For example, the single-lever hot and cold water mixing faucet and the automatic sensor faucet are easy to operate without water and save more water. In addition, you can reduce the water consumption by setting the size of the water flow and the way of the shower.

Water-saving hydrant: to avoid unconscious waste of hot water.

Water-saving hydrants refer to hydrants that reduce primary energy consumption by reducing the amount of hot water used. They are divided into thermostatic hot water mixing hydrants, single-handle hot water mixing hydrants, and manual water stop hydrants. , Water hydrants with small flow spitting structure and hydrants with preferentially outflowing cold water structure are the main ones. The highlight is that flow regulation and temperature regulation are within the user's operating range.

When the handle of a normal faucet is in the middle position, it usually represents mixed water. When it is turned on normally, it will produce the ignition operation of the water heater. The heat-saving water faucet device will give priority to the cold water mechanism before you know it, preventing the water heater from running. The mixing point is Previous location

In addition, the single rod design can effectively control the water volume. The ECO valve body has two water control devices, which will not waste water to the greatest extent.

The design of foaming water.

By injecting air into the water, the volume of water particles is increased to achieve the desired water saving effect.

Generally, the foam type water outlet adopts more than two kinds of very fine shower holes, and each drop of water is evenly distributed, and it is more delicate, easy to fall off the cleaned dirt, good hand feeling, easy to produce soap and other foam, and can be used comfortably.

Sensor faucet.

Just place your hand on the upper sensor to turn on/off the water. In the power-saving mode, the sensor detects the time when the tableware and hands are placed under the faucet to control the effective water output.

Intelligent sensor, often use hot water and water cut to save water.

For the following faucets, the water-saving hydrant is recognized as an environmental protection mark.

Water-saving faucet with built-in valve.

Built-in metering valve faucet.

Faucet with foaming function.

Hot and cold water mixing faucet (constant temperature)

Hot and cold water mixing faucet (single handle)

Timed shutdown faucet.

Quantitative shutdown faucet.

The kitchen faucet is an item that is used every day, so try to consider the water-saving type when choosing. It is not only necessary to combine the style of the entire cabinet, but also to consider the convenience of use, convenient care, the size of the tank and the location of the faucet. How to facilitate between cooking and washing items, etc. In the case of an open kitchen, not only from the kitchen, but also from the dining room and living room to see the faucet into the consideration object. Therefore, while choosing the entire cabinet, you can also choose the design and setting of the faucet.

According to the size and location of the sink.

Long handle stretch design.

The hand-held sprinkler can be pulled out and held in your hand, and you can easily sink the sink and items with one hand. The upper part usually has the switch of water outlet mode. [Sprinkler pull-out size: about 30 cm (approximately 27 cm for water purifier)]

The spouting space of the faucet.

Generally speaking, the diameter of the pot is about 20~30 cm. When choosing a faucet, choose a long-handled faucet (25~30 cm) to extend the water outlet to the center of the sink or pot, increasing the spouting space, large pots and pans. Can be easily cleaned and used.

In addition, the high throw faucet is designed to avoid friction or conflict with the pot and utensils when receiving water.

Electroplated metal handle.

The material of kitchen faucet is generally real, which is the most common pure copper faucet on the market. However, due to the special kitchen environment, pure copper faucets are not necessarily the best choice. All pure copper faucets have electroplating on the outermost layer, and the function of electroplating is to prevent the internal real copper from corrosion and rust. The kitchen has a lot of oily smoke, plus the greasy hands and detergent when washing dishes, often need to clean the faucet. If it is not cleaned in the correct way, the plating layer of the faucet will be damaged, and the faucet is likely to be corroded and rusted. If you want to choose an all-copper kitchen faucet, you must make sure it is electroplated. Otherwise, the faucet is prone to rust and corrosion.

Contact Us