First of all, when installing a faucet, have qualified professionals to install the device. Before the installation, pay attention to shoveling the impurities in the pipeline clean; during the installation process, the faucet should try not to bump with hard objects, and do not leave cement, glue, etc. on the surface, to prevent damage to the surface coating gloss.
2. Do not close the faucet forcibly
Many people are used to closing the faucet with force after using the faucet, which is very undesirable. Even the traditional faucet does not require great effort to screw it. Not only will it not prevent water leakage, but it will damage the sealing valve, causing the faucet to be closed tightly. The correct way is to just quietly roll it. .
3. Good habits keep the faucet intact as new
After using the faucet normally, develop a good habit of frequently washing with clean water and drying with a soft towel. If too much dust accumulates on the outside, it will affect the service life of the faucet on the one hand and beautiful on the other. In addition, in the ordinary use process, pay attention to prevent the faucet handle as a handrail to support or use.
4. Finish the exterior dust in time
If you find that your faucet is now heavily dusted and cannot be washed thoroughly with clean water, you need to use some more powerful methods. Use a damp cloth or sponge dipped in a small amount of toothpaste to scrub the faucet, then rinse with clean water and wipe off excess water with a dry rag.
5. Clean the impurities when the water flow becomes small
In the process of use, if the water output is found to be reduced, the faucet may be blocked. It doesn't matter if it's blocked, because the bubbler at the spout is designed for removable and washing, as long as the impurities are cleaned and then installed carefully, it can generally recover as before.